Dell Precision Workstation 610 Fan 83581, Case Cooling Fan, 92x25mm with Dell 3-pin plug connector.
The Dell Precision Workstation 610 Desktop Computer came equipped with the JMC DATECH 0925-12HBTA Cooling Fan as Original Equipment and JMC 9025-12HBTA is the Direct O.E. replacement.
However, some older Dell Precision Workstation 610 computers required a longer wire length to reach and plug into the motherboard. For those computers an alternate fan is available, input 9025-12HBTA-2 into the sites search box to bring up that listing.
NOTE: The listing is for the FAN ONLY. The bezel-mounting bracket does not come with the fan. You will need to retain and reuse these pieces from your old fan in order to reattach the new fan to the tower case properly. These pieces are not included with the fan, nor do we have available these Dell proprietary parts. So please be extremely careful when disassembling the bezel-bracket from the fan, and not breaking off the guide pins that hold the fan in the bracket assembly.
If you are unable to remove the bezel-bracket from the old fan to reinstall to the new fan, please let us know. We will provide the service FREE of charge as a courtesy to our customers that purchase this fan from us. However, you will need to contact us prior and arrange to ship the bezel-bracket assembly to us in order to make the change.
If your model does not have the JMC DATECH fan, that is because Dell used several other brand manufacturers to produce this fan. They are the same and all compatible with your model.
This is a Dell 3-pin, 92mm x 25mm, 12 Volt, Thermal Control fan with the Heat Sensor. It is a Direct Original replacement for 83581 and designed to work in most Dell Precision Workstation 610 computers.
Please check your fan application and verify plug configuration before making your purchase.
Restore your Dell computer to its Original condition with this High Quality fan with Genuine Dell parts.
Dell Precision Workstation 610 83581, Case Cooling Fan, 92mm x 25mm with Dell 3-pin plug connector is in stock and ready to ship.
. Condition: New
. Mfr: JMC Datech
. Size: 92mm x 92mm x 25mm
. Type: Thermal Control with Heat Sensor
. Voltage: DC 12V
. Rated Current: 0.60A
. Speed: 1500-3500 RPM
. Air Flow: 30~66 CFM
. Noise Level: 46.0 dBA
. Bearing: Dual Ball
. Wire Length: 7.5"
. Connector: 3-wire/Dell 3-pin